Water leak protection controller Mastino TS1
Manages the system of protection against flooding of premises. Receives signals from sensors and gives commands to cranes.
Price: 15334 UAH
Colors:
white, black
Water leak protection controller Mastino TS1
Manages the system of protection against flooding of premises. Receives signals from sensors and gives commands to cranes.
Price: 15334 UAH
Colors:
white, black
Water leak protection controller Mastino TS1 (black, white)
It is used to receive signals from water flow sensors and provide commands to open/close electric taps. Provides light and sound notification of an accident. Up to two faucets and up to five sensors can be connected to the Mastino TS1 controller. In the event that water hits the sensor, the controller automatically sends a command to the faucets to close them automatically, thus protecting the premises from flooding.
Description of the logic of the controller Mastino TS1:
1. Working mode. When the device is connected to the 220V network according to the scheme, it turns on and switches to the operating mode, the power supply at terminal number 4 (opening of taps) is switched on permanently. No time limit. Flashing green LED.
2. Water shut-off mode. When the water sensor is triggered, or if the sensor was already closed when the controller was turned on, the system goes into emergency mode. Power from terminal number 4 (opening taps) is turned off and at terminal number 3 (closing taps) it is turned on continuously. Red LED flashing. No time limit, and no response to the auto-rotation of the faucets and the humidity sensor, until the reset button, located on the front panel, is physically pressed.
3. Mode of auto-rotation of faucets against souring. The tap closing/opening program should be turned on twice a month. Turns on only if the controller is in normal operating mode. In the activated mode, the water shut-off does not work. If the sensor is triggered during the auto-rotation mode of the faucets, the controller goes into emergency mode. The timer for turning on the auto-rotation mode of the faucets is counted from the time of operation of the working mode.
Features of installation and operation:
- Read the instructions carefully before starting work.
- De-energize the wiring before connecting the Mastino TS1 controller or turning it off for inspection or replacement.
- Electrical connections and connection of the controller to the network must be performed by a qualified electrician.
- The manufacturer's warranty does not cover controller malfunctions caused by improper connection.
- The supply voltage to the controller must be supplied from the power cabinet and necessarily through the PZV (30 mA).
- Connect the phase and zero according to the connection diagram
- "Quick installation" block for seven outputs. Each output is designed to connect one wire. To connect more wires, it is absolutely necessary to connect them by tinning or use quick-installation terminals, such as Wago
Technical characteristics:
| Indexes | Value |
|---|---|
|
Producer
|
Mastino
|
|
Country of manufacture
|
Ukraine
|
|
Number of keys
|
1 pcs
|
|
Max. the number of taps
|
2 pcs
|
|
Maximum number of connectable sensors
|
5 pieces
|
|
Contact material
|
Copper
|
|
Body material
|
Glass
|
|
Supply voltage
|
220 V ~ ± 10 V, 50 Hz
|
|
Illumination
|
Yes
|
|
Power
|
no more than 2 W
|
|
Security level
|
IP20
|
|
Dimensions
|
86×86×35 mm
|
|
Dimer type
|
Sensory
|
|
Time of continuous operation
|
not limited
|
|
Color
|
black / white
|
|
Installation method
|
Built-in
|
|
Guarantee
|
2 years
|
